Items filtered by date: December 2015

A HP Laserjet will not work with Windows 7. The followinf solution works well. If you vary the following method it will work for 32 bit if required.

Alright, I found the real fix for this so you can print at normal speed and not get the €œPesonality Not Supported: PCL€ Error [For Advanced Users].

1. First off, go download HP LaserJet 1012 Host Based drivers.

64-bit:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=377934&prodNameId=306510&
swEnvOID=2100&swLang=8&mode=2&taskId=135&swItem=lj-67501-1

32-bit:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=306510&prodTypeId=18972&prodSeriesId=377934&
swLang=8&taskId=135&swEnvOID=2093

2. Extract the driver.
3. Plug in and turn on your printer if you haven€™t already.
4. Go to Start>Devices and Printers, and choose to add a printer
5. Choose to add a local printer
6. Choose Dot-4-usb printing support
7. Click Have Disk on the next window
8. Navigate to where you extracted the drivers, and choose the inf file
9. Choose the HP 1012 HB Driver
10. Follow the prompt till it installs the printer or what not

Now you may notice that it prints slow as heck, well no worries! To fix that do this.

1. Go to Start, right click Computer and choose Manage
2. Go to Device Manager
3. Find 1284.4 dot4usb Printing Support
4. Right click it and choose Update Driver
5. Choose €˜Browse my computer for driver software.
6. Choose USB Virtual Printing Support
7. Follow the prompt, exit out of Device Manager
8. Go to Start>Devices and Printers
9. Right click HP 1012 HB, choose Printer Properties
10. Go to the Port Tab, find Virtual USB Printing Support (Not dot4) and check that.
11. Click Ok.

Alternate Method 1
 

NB:

• 1300 has proper driver for windows vista
• 1300 has same internals as 1015
• 1300 uses 'HP Univeral Printing PCL5/PCL5.1' system 5.0/5.1 - use 5.0 1015 is a pcl 5.0

I am getting the Outlook 2003 "This operation has been cancelled due to restrictions in effect on this computer" hyperlink problem

GO here: http://www.dougknox.com/xp/file_assoc.htm and use the HTM/HTML association .zip.

Computer booted up showing the desktop as it is when you first get the computer - all programes show on the start menu, (default profile is being used)

But look in My Documents & there 's nothing in the folder. All email profiles & info that I had on the desktop completely vanished.

Go into safe mode - just the same

If you look in the profile eg C:\User\thedukes0brent\docs  - then all the files are there as expected, If you look on the profile desktop eg C:\User\thedukes0brent\desktop - then all the shortcuts etc are there.

So.......in effect the user account is there, but when you log on to it all settings & documents are not being accessed.

Solution:

In registry - HKLM\software\microsoft\windowsNT\currentversion\profile

• There are two folder enteries with the same id number, one ending in .bak & one without bak. 
• The one without the .bak should have an entry for the profile and is pointing to a  TEMP folder
• Swapping the .bak extension between the two folders, it points the profile back to the correct user folder

when you use certain code in TinyMCE it gets stripped when you save it.

Firstly make sure you have set Joomla's whitelist/blacklist thing properly as descibed in this article.

http://docs.joomla.org/Why_does_some_HTML_get_removed_from_articles_in_version_1.5.8%3F

The easiest way of checking this is to turn off your editor, paste some code in, save the article and see if joomla has stripped the code out.

Now  you need to add some code for your selected HTML Tags in to the Valid Extended Elements field in Tiny Parameters.

Syntax is

tag[element1|element2|etc.],othertag[element1a|element2a|etc.]

Example

{code class="brush: xml"} {/code}

In this case, you can use the star which lets use any element.
object[*],param[*],embed[*]

 You could limit what you authorize and add something like this

object[width|height],param[name|value],embed[src|type|allowscriptaccess|allowfullscreen|width|height]
 

Notes

• This method can be used for any specific tag one needs not to be cleaned.
• Parameter Tiny Clean Up on Save to "Always" as advised in the tooltip!
  If you do, then Tiny extraneous mce_something stuff will remain in code, breaking email cloak. as mentioned on joomla forum
• see here for fijiweb post
   

To determine if your server is running PHP via phpSuExec (i.e., CGI) instead of Apache

• upload a phpinfo() file and check the “Server API” near the top of the file.
• If it says “Apache”, PHP is running on Apache;
• if it says “CGI”, PHP is running via phpSuExec.

This is important because it is impossible to manipulate php.ini directives via htaccess while running PHP on phpSuExec.

The PHP Info page is built into PHP and gives you vital information about your server.

• Create a blank PHP file
• add the following line to it.
  
  {code class="brush: php"}{/code}
• Upload the file to your webserver and then run it.

You can reset file permissions via PHP. the code below is an example on resetting file permission recursively. You must have shell_exec enabled.

• Create a blank php file
• Add the following code to it

  <?php
    echo shell_exec( 'find . -type f -print0 | xargs -0 chmod 644' );
    echo shell_exec( 'find . -type d -print0 | xargs -0 chmod 755' );
  ?>

• Place the file in the root directory you want it to work from
• go to your webbrowser and execute the file

You are unable to login to windows. It appears to work and then logs straight back out. This is usually because of a virus or malware that has been removed but the registry entery has not.

• Navigate to
  
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\
   
• In the right pane, you might see something like
  
  C:\WINDOWS\System32\wsaupdater.exe
   
• Change it so that it reads:
  
  C:\WINDOWS\System32\userinit.exe

Reset a Windows User Profile permissions

This has been tested and works well on Windows 10.

Modify and run the code below from a command prompt with administrator rights.

ICACLS "I:\Users\peter" /grant Everyone:F /C /T

Quick way to reset all security permissions to default

This works for Windows Vista but it works also for windows 7. It might also work for later versions.

Some of the permissions have been changed and I would like to find a way to reset all the permissions to the default settings. Can anyone provide a quick way to reset all permissions to default?

Instructions

Just run in a evalated prompt the following command.

secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose

Links

• How do I restore security settings to a known working state?

Reset the Registry and File Permissions

This was last used by me on Windows XP. Some of this might work on later versions of Windows but has not been tested.

Occassionally the permissions on the windows registry or files become corrupt or altered. The methods below can restore access to all files and registry keys.

Programs will not install if the permissions are not correct in the registry.

SubInACL is a command-line tool that enables administrators to obtain security information about files, registry keys, and services, and transfer this information from user to user, from local or global group to group, and from domain to domain.

Instructions

Here are some steps that can be used to download and run the SubInACL tool to repair file and registry permissions that are often needed to successfully install programs on Windows, particularly for MSI-based (Windows Installer) setups:

1. Download the SubInACL tool and install it.  By default it will install to
   c:\Program Files\Windows Resource Kits\Tools
   
   Or get it from a system with SubInACL installed, can be run like a nbromal DOS program (ie same folder)
    
2. If you are running Windows Vista, click on the Start menu, choose All Programs, then Accessories, then right-click on the item named Command Prompt and choose Run as administrator
3. If you are running an OS other than Windows Vista, go to the Start menu, choose Run, type cmd and click OK
4. In the cmd prompt, type notepad reset.cmd and click yes to open Notepad.exe and create a new text file named reset.cmd
5. Copy and paste the following contents into reset.cmd
   

   cd /d "%programfiles%\Windows Resource Kits\Tools"
   
   subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=YOURUSERNAME=f /setowner=administrators > %temp%\subinacl_output.txt
   subinacl /keyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=YOURUSERNAME=f /setowner=administrators >> %temp%\subinacl_output.txt
   
   subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
   subinacl /keyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
   
   subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
   subinacl /keyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
   
   
   subinacl /subdirectories %programfiles%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
   
   subinacl /subdirectories %windir%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt

6. Change the values named YOURUSERNAME to be the Windows user account that you are logged in with.
   
   Note:  The YOURUSERNAME value should match the name of your user folder at c:\Documents and Settings (or c:\users on Windows Vista and higher).  You can also find the value to use for YOURUSERNAME by launching Task Manager and looking at the user name listed in the User Name column of the Processes tab.
    
7. Save and close reset.cmd.
8. In the cmd prompt, type reset.cmd and press enter to run the SubInACL tool.  This tool will take several minutes to run, and it requires that the user account you are using has administrator privileges on the system.  This is why it is necessary to run it from an elevated cmd prompt on Windows Vista.  Step 2 above can be used to start an elevated cmd prompt on Windows Vista.
9. After reset.cmd completes, try to install the product that previously failed to install correctly on your system.

Note: There are a couple of scenarios where installing or running SubInAcl can fail.  For example, some non-English versions of Windows have the name of the Administrators group translated to another language, and the command lines listed above will fail in that case.  I have posted workarounds for the issues that I know of in this separate blog post.

Also note: Running the above command lines will cause SubInAcl to create a log file named %temp%\subinacl_output.txt.  If you see any errors reported in the cmd prompt after running SubInAcl, you can look in this log file for more detailed information about what file(s), folder(s) or registry value(s) are causing the errors.  To open this log file, you can click on the Start menu, choose Run, type notepad %temp%\subinacl_output.txt and click OK.

When looking at this log file, you may see some errors reported with error code 5.  That error code means Access Denied, and it is typically caused by Windows or some other program running on your system that is holding files, folders or registry values in use so that SubInAcl is unable to update the permissions for them.  Most of the time, that type of error in the SubInAcl output can be safely ignored, but you may need to try to reboot and then manually fix the permissions for these files, folders or registry keys as a workaround.

Alternate verions of the script

subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=system=f

Using SECEDIT.EXE (for Windows XP Professional)

In Windows XP Professional, you may use the following secedit command-line to reset the file and registry permissions to defaults.

secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose

For more information, see article How to reset security settings back to the defaults.

This is an alternative permissions reset method using SetACL.exe

SetACL.exe -on "C:\windows" -ot file -actn setprot -op "dacl:np;sacl:nc" -rec cont_obj -actn setowner -ownr "n:S-1-5-32-544;s:y" E:\SetACL.exe -on "C:\windows" -ot file -actn setprot -op "dacl:np;sacl:nc" -rec cont_obj -actn setowner -ownr "n:S-1-5-32-544;s:y"