- -Put your device in bootloader Mode
- -Disable USB in Active Sync
- -Now connect woth USB cable and open mtty utility
- -Select the "WESUSB... " port
- -You shall see a blank white screen..press Enter to get "USB>"
- -Then type ( as BUzz has informed) set 14 0
- (here I wud like to inform that after doing the above I did not get success so I typed set 14 10,then set 14 9 for two three times)
- -Then I ran the ROM Upgrade directly(After enbabling the USB)
- -I then followed the procedure as informed on the Congratulations Screen that is hold the two "-" buttons and soft reset and then pressed 0
- -I got them back to normal..
Published in
Windows XP